
F3S-TGR-CL
Multi-beam, finger and hand protection safety sensor with the same design and functionalities
The F3S-TGR-CL safety sensor family is simple to wire, mount and configure since all models in finger, hand and body protection in type 2 and type 4 are designed in the same way and providing the same set of user selectable functions.
- Family concept in wiring and mounting for total consistency in every application
- No need for external devices by integrated safety control functions selectable via built-in dip-switches
- All models with external device monitoring, interlock function, range setting (short and long range) and optical or wired coding selection
- Advanced models include pre-reset, muting and blanking function and cyclic operation
- Muting lamp integrated for advanced models
- Type 2 according to EN61496-1 and PL c according to EN ISO 13849-1
- Type 4 according to EN61496-1 and PL e according to EN ISO 13849-1
Specifications & ordering info
Ordering information
Multi-beam safety sensors
F3S-TGR-CL2_-K_ (Type 2)
Basic feature set1 |
Advanced feature set2 |
|||
---|---|---|---|---|
F3S-TGR-CL4_-K_ (Type 4)
Basic feature set1 |
Advanced feature set2 |
|||
---|---|---|---|---|
Safety sensors
F3S-TGR-CL2_ (Type 2)
Basic1 |
150 mm to 2,400 mm3 |
||||
Advanced2 |
|||||
150 mm to 2,250 mm3 |
|||||
F3S-TGR-CL4_ (Type 4)
Basic3 |
150 mm to 2,400 mm3 |
||||
Advanced4 |
|||||
Master4 |
150 mm to 2,250 mm5 |
||||
Slave6 |
|||||
F3S-TGR-CL-_-_M/S Master-Slave Series
- A Master-Slave cascade system is made of one master segment and one slave segment.
- The length of the total protective field can vary from minimum 300 mm till maximum 2,400 mm.
- The interconnect cable length limitation between master and slave segment is in total max. 0,9 m.
Possible combinations of master and slave are in this table:
Accessories
Receiver cables (M12-8pin, shielded, flying leads)
![]() |
Sensor connector with open cable end M12-8pin, outer shielding layer |
||
Transmitter cables (M12-4pin, shielded, flying leads)
![]() |
Sensor connector with open cable end M12-4pin, outer shielding layer |
||
Mounting brackets
![]() |
F39-TGR-ST-SB7 |
||
![]() |
Master-Slave accessories
![]() |
Male-male extension connector M12-8pin, outer shielding layer |
||
![]() |
Laser alignment kit
![]() |
Mounting systems and mirrors
Adjustable stands
Mirror system for multi-beam safety sensors (F3S-TGR-CL_-K_)
Muting accessories
Cable cover
Specifications
Multi-beam safety sensors
Finger- and hand safety protection sensors
F3S-TGR-CL and G9SB-301-D in manual reset

How can we help you?
If you have a question or would like to ask for a quote, please contact us or send a request.
Kontakt meg F3S-TGR-CL

Takk for din forespørsel. Vi vil kontakte deg så snart som mulig.
Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:
DownloadTilbud for F3S-TGR-CL
Ved å fylle ut dette skjemaet vil du motta et tilbud på det valgte produktet. Vennligst fyll inn alle obligatoriske felter. Dine personlige opplysninger vil bli behandlet konfidensielt.

Takk for din tilbudsforespørsel. Vi vil sende deg det forespurte tilbudet så snart som mulig.
Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:
Download