Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:

get direct access

Fill in your details below and get direct access to content on this page

Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:

Download

NX-OD6121-6

32 Digital Outputs, Standard speed, NPN 24 VDC, 0.5 A/point, 4 A/NX Unit, FCN40 connector (not included), 30 mm wide

Accessories

NX-series Digital I/O Unit - NX-ID/IA/OD/OC/MD Datablad

enPDF 4,5 MB

CAD-bibliotek

Specifications

I/O system	NX I/O Bus
Type of module	Digital I/O
Number of digital inputs	0
Digital input type	None
OFF/ON delay	0.1-0.8 ms
Number of digital outputs	32
Digital output type	NPN
Permitted voltage at output	15.0-28.8 V
Output current	0.5 A
Short-circuit protected outputs
Connection method	1-wire
Signal processing	Free running, Standard speed, Synchronous
IO-Link master
I/O connection type	FCN (plug not included)
Number of I/O connectors	1
Detachable I/O connector
Suitable for safety functions
SIL according to IEC 61508	None
Communication port(s)	None
Number of IOV (V+) terminals	4
Number of IOG (V-) terminals	4
Number of COM terminals	0
Degree of protection (IP)	IP20
Product Height (unpacked)	100 mm
Product Width (unpacked)	30 mm
Product Depth (unpacked)	72.5 mm
Product Weight (unpacked)	90 g

Tilbehør

	G70A-ZOC16-3 DC24	Sokkelblokk for 16 G2RS releer, NPN (+ felles)
	XW2D-20G6	General-purpose I/O terminal block, MIL20 socket, M3 captive screws, 20 points
	XW2D-40G6	Terminal blokk, 40 punkter
	XW2K-40G-O32B	PLC interface wiring system with push-in plus technology and power supply terminal, 40 points MIL connector, Input/Output, 0.5 A, NPN/PNP, 30 VDC, DIN rail horizontal and vertical mounting
	XW2K-40G-O32B-OUT	PLC interface wiring system with push-in plus technology and power supply terminal, 40 points MIL connector, Output, Signal: 0.5 A, Power: 7 A, NPN, 30 VDC, DIN rail horizontal and vertical mounting
	XW2Z-0100BF-L	I/O connection cable, unshielded, FCN40 to MIL40, 1 m
	XW2Z-0100BH-L02	I/O connection cable, unshielded, FCN40 to 2 x MIL20, 1 m, cross-wired
	XW2Z-0100BN-L	I/O connection cable, unshielded, FCN40 to open ends, 1 m
	XW2Z-0200BF-L	I/O connection cable, unshielded, FCN40 to MIL40, 2 m
	XW2Z-0200BH-L02	I/O connection cable, unshielded, FCN40 to 2 x MIL20, 2 m, cross-wired
	XW2Z-0200BN-L	I/O connection cable, unshielded, FCN40 to open ends, 2 m
	XW2Z-0300BN-L	I/O connection cable, unshielded, FCN40 to open ends, 3 m
	XW2Z-050B	I/O connection cable, FCN40 to MIL40, 0.5 m
	XW2Z-100B	I/O connection cable, FCN40 to MIL40, 1 m
	XW2Z-150B	I/O connection cable, FCN40 to MIL40, 1.5 m
	XW2Z-200B	Kabel for 40 pin Fujitsu plugg til XW2-40G, 2m
	XW2Z-300B	I/O connection cable, FCN40 to MIL40, 3 m
	XW2Z-RO100C-75	I/O connection cable, with shield connection, FCN40 to 2 x MIL20 for G70A-ZOC16-3, 1 m / 0.75 m
	XW2Z-RO150C-125	I/O connection cable, with shield connection, FCN40 to 2 x MIL20 for G70A-ZOC16-3, 1.5 m / 1.25 m
	XW2Z-RO200C-150	I/O connection cable, with shield connection, FCN40 to 2 x MIL20 for G70A-ZOC16-3, 2 m / 1.5 m
	XW2Z-RO200C-175	I/O connection cable, with shield connection, FCN40 to 2 x MIL20 for G70 A-ZOC16-3, 2 m / 1.75 m