Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:

get direct access

Fill in your details below and get direct access to content on this page

Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:

Download

E2C-EDA

High precision positioning inductive proximity sensor with separate amplifier

The separate amplifier inductive sensor family E2C-EDA offers high precision distance positioning and detection. The teach-in function allows simple installation, and with the window function (2 outputs) production tolerance checks can easily be set up and modified.

Typically several hundred µm detection precision
Precision distance teaching
Window function (2 outputs) for production tolerance checks

Compare all models

Specifications & ordering info

Ordering information

Sensor heads

			Sensing distance	Repeat accuracy	Order code
3 dia. × 18	¢	-	0.6 mm	1 µm	E2C-EDR6-F
5.4 dia. × 18			1 mm	1 µm	E2C-ED011
8 dia. × 22			2 mm	2 µm	E2C-ED021
M10 × 22			2 mm	2 µm	E2C-EM021
30 × 14 × 4.8			5 mm	2 µm	E2C-EV051
M18 × 46.3	-	¢	7 mm	5 µm	E2C-EM07M1
M12 × 22	¢	-	2 mm	2 µm	E2C-EM02H

Amplifier units with cables

Item	Functions	Order code
Item	Functions	NPN output	PNP output
Twin-output models	Area output, open circuit detection, differential operation	E2C-EDA11	E2C-EDA41
External-input models	Remote setting, differential operation	E2C-EDA21	E2C-EDA51

Amplifier units with connectors2

Item	Functions	Order code
Item	Functions	NPN output	PNP output
Twin-output models	Area output, open circuit detection, differential operation	E2C-EDA6	E2C-EDA8
External-input models	Remote setting, differential operation	E2C-EDA7	E2C-EDA9

Specifications

Sensor heads

Item		3 dia.	5.4 dia.	8 dia.	M10	M18	30×14×4.8 mm	M12
Item		E2C-EDR6-F	E2C-ED01(-_ )	E2C-ED02(-_ )	E2C-EM02(-_ )	E2C-EM07(-_ )	E2C-EV05(-_ )	E2C-EM02H
Ambient temperature	Operating	-10 to 60°C (with no icing or condensation)						-10 to 200°C
Ambient temperature	Storage	-10 to 60°C (with no icing or condensation)						-10 to 200°C
Degree of protection		IEC60529 IP67						IEC60529 IP60
Material	Case	Brass	Stainless steel	Brass			Zinc	Brass
Material	Sensing surface	Heat-resistant ABS						PEEK

Note: For amplifier specifications refer to complete datashee

1. For models with cut-to-length cables add “-F” for example E2C-ED01-F
For models with protective stainless steel spiral tubes add “-S” for example E2C-ED01-S

2. Order fitting connector (E3X-CN21_) separately from accessories.

1. For models with cut-to-length cables add “-F” for example E2C-ED01-F
For models with protective stainless steel spiral tubes add “-S” for example E2C-ED01-S

2. Order fitting connector (E3X-CN21_) separately from accessories.

How can we help you?

If you have a question or would like to ask for a quote, please contact us or send a request.

+47 22 65 75 00

Request quotation

Tilbud for E2C-EDA

Ved å fylle ut dette skjemaet vil du motta et tilbud på det valgte produktet. Vennligst fyll inn alle obligatoriske felter. Dine personlige opplysninger vil bli behandlet konfidensielt.

Personlige opplysninger

Produkt E2C-EDA

Navn.

Text error notification

Etternavn

Text error notification

E-post

Email error notification

Telefon

Text error notification

Firma

Text error notification

Land

Country error notification

Tilbudsdetaljer

Kjøper du fra Omron eller en distributør/partner?

Select notification error

Tittel/stilling

Select notification error

Spørsmål eller bemerkninger

Text area error notification

Jeg er enig i OMRONs retningslinjer for personvern

Checkbox error notification

Abonner på vårt nyhetsbrev

Checkbox error notification

Takk for din tilbudsforespørsel. Vi vil sende deg det forespurte tilbudet så snart som mulig.

Vi har for tiden tekniske problemer. Ditt skjema har ikke blitt innsendt. Vi beklager så mye og håper du vil prøve igjen senere. Detaljer:

Download

Request quotation

Performance comparison

Environmental resistance

Chemical resistance

Issue: Detergents and chemicals used for cleaning or during the manufacturing process may severly damage (corode) the housings or sensing face of sensors. But apart from these conciously used chemicals, accidentally applied liquids (soft drinks with low pH values or sweat) can unintentionally damage the sensors.

Solutions

* Market standard: basic splash water protection for dry and protected machine environment.

** Tested enhanced high pressure water and saltwater spray protection with our E2A for open factory environment with occasional touching (sweat), cleaning or accidental liquid contact. The optional stainless steel housings may provide additional protection.

*** High and highest chemical resistance with our E2EH and E2FQ for frequent cleaning or intense and continuous chemical liquid contact.

Extreme temperatures

Issue: Continuously high or low temperatures exceeding the rated specifications quickly damage standard sensors. Suitable materials and/or product design are required for these applications.

Solutions:

* Market standard: normal ambient temperatures for operation and storage for standard factory environments.

** Specified extended operating temperature range down to -40°C with our E2A for machine operation in lower temperatures.

*** High temperature resistance up to 200°C with our E2EH and E2C for applications with high continuous temperatures.

Changing temperatures

Changing temperatures - performance

Issue: Temperature variations in machines resulting from the operation, from usage in different regions or even from daily or seasonal fluctuations are very common. The performance and specifications of electronic components are significantly influenced by the ambient temperature resulting e.g. in variations of the sensing distance. The design of electronic circuits, the usage of compensatory elements and the balance of used parts play a vital role in reducing the sensor performance variations due to changing temperatures.

Solutions:

* Market standard: basic temperature compensation for standard factory environment.

** Designed-in enhanced temperature compensation elements with our E2A for higher operational stability in machine and factory environments even with higher temperature variations.

*** Highest temperature influence immunity by separating the sensing head from the electronic parts with our E2EC and E2C for high precision positioning applications with minimal influence by changing temperatures.

Changing temperatures - lifetime

Issue: Rapidly changing temperatures and different expansion coefficients can lead to mechanical stress between connecting materials leading to mechanical damage or faster aging.

Solutions:

* Market standard: sensors designed for standard factory environments – faster aging or damages may occur with frequently or rapidly changing temperatures.

** Designed-in and tested enhanced lifetime with our E2A for machine and factory environments with frequently or rapidly changing temperatures.

*** Tested combinations of temperature and mechanical stress for special applications or certifications.